|
EMPLOYMENT OPPORTUNITIES - Posted
July 27 2010 |
Company:
Setpoint Building Automation Inc.
Location(s): Toronto
Description: A Toronto Building Automation firm seeks a recent
graduate in the GTA, for programming & troubleshooting. A
Mechanical Engineer with HVAC experience is an asset. Please
email Keith at
klaidman@setpoint.ca
Qualifications:
Notes:
Contact (email):
klaidman@setpoint.ca
Contact (fax):
Contact (tel):
Visit Website for more info (URL):
http://www.setpoint.ca
|
|
EMPLOYMENT OPPORTUNITIES - Posted
July 22, 2010 |
Company:
Blue Ridge Technologies
Location(s): Atlanta or major metro area
Description: Blue Ridge Technologies International, a dynamic
and privately held company with excellent career opportunities,
is seeking a National Account Manager with a track record of
delivering results. We specialize in integrated lighting control
that is base upon an open architecture to bring our partners and
clients a comprehensive energy management and productivity
solution. The products we design, manufacture and support are
applicable to virtually all industries and types of
organizations and provide a unique opportunity for growth and
advancement over time.
Qualifications: BA/BS in Business, Engineering or Technical
Field
· Proven project management skills
· Must be able to read architectural, mechanical and electrical
blueprints and have a solid understanding of basic electrical
and mechanical control systems
· Must have a solid understanding of the industry protocols used
by targeted accounts Modbus, BACnet, N2, LON, etc.
· Must have a solid understanding of network communications
technology Internet, Intranet, VPN, TCP/IP, Ethernet, etc.
· Must have at least three years of customer service or inside
sales support and have excellent written and oral communication
skills.
· Must be proficient in Microsoft Office, Lotus Notes and have
at least 2 years experience with AutoCAD and Visio.
· Must be self motivated, team player, and have the ability to
work unsupervised with minimal direction.
· Must be organized, detail oriented, and an excellent listener
· Regular travel throughout the US is required, approximately
50% to 75%
Notes:
Contact (email): HR@BRTint.com
Contact (fax): 770-790-4883
Contact (tel): 770-790-4880
Visit Website for more info (URL):
http://www.BRTint.com |
|
EMPLOYMENT OPPORTUNITIES - Posted
July 14, 2010 |
Company:
OEMCtrl
Location(s): Kennesaw, GA
Description: Start Date: Immediate
Employment Type: Permanent/Full Time
Scope
Automated Logic Corporation, located in Kennesaw, GA has an
immediate opening for an Account Sales Engineer.
The OEMCtrl Account Sales Engineer is responsible for working
closely with assigned OEM accounts to ensure their transition to
and long-term utilization of Automated Logic/OEMCtrl products.
Duties
Job activities will include, but are not be limited to the
following:
Product support, training, testing, new product coordination,
documentation review, and sales support. Sales support (as it
relates to new business) will involve lead generation and
follow-up, proposal development, product selection, sales
presentation preparation, marketing and market analysis,
applications support and promotion of products through formal
demonstration. Additionally, OEMCtrl Account Sales Engineers are
responsible for staying in tune with the latest trends in the
automation and communications industries, listening to and
documenting customer requests, collecting information for
competitive analysis, and delivering status to customers
regarding product development efforts.
Qualifications: Knowledge, Skills
& Abilities:
Excellent verbal and written communication skills (including
oral expression and comprehension, written expression and
comprehension, persuasion, active listening, social awareness,
etc).
Ability to develop constructive and cooperative working
relationships with others (inside and outside the company), and
maintain them over time.
Keeping up-to-date on new technologies and applying new
knowledge and techniques to the job.
Strong analytical, problem solving, and computer technical
skills.
Strong organization skills required.
Ability to generate, review, and/or edit technical
documentation for use with hardware and software products.
Relentless dedication to quality and customer satisfaction.
Must be proactive, work independently and be comfortable
making decisions with little input from supervisor.
Minimum Qualifications:
Must have 2+ years technical/product support and/or sales
experience in similar industry.
4 year technical/engineering degree (BSCS, BSEE, BSME, etc) or
equivalent industry experience.
Working knowledge of BACnet, Modbus, N2 and LonWorks
communications protocols and network topologies.
Understanding of LAN and WAN configurations.
Strong understanding of the fundamentals of HVAC and control
theory.
Understanding of current and previous generation Windows
operations systems (2000, XP, Vista).
Must be able to manage multiple tasks simultaneously.
Must be flexible with regards to job duties (those listed and
others as assigned by supervisor).
Must be willing to travel.
Preferred Qualifications:
Strong understanding of Automated Logic/OEMCtrl hardware and
software products (or similar knowledge of a competitive brand).
2+ years controls industry experience (sales, applications
engineering, startup, service, etc) a plus
Strong understanding of electronics and electrical systems.
Use and familiarity with the following software packages a
plus: Acrobat Pro, IBM Lotus Notes, AutorIT (enterprise content
management software).
Familiarity with XML, SOAP, HTML, Java, Java Script and other
web-based technologies a plus
Experience in technical support environment a plus.
Applications engineering and programming experience a plus.
Notes:
Contact (email):
hr@automatedlogic.com
Contact (fax): 770-795-3508
Contact (tel):
Visit Website for more info (URL):
http://www.automatedlogic.com |
|
EMPLOYMENT OPPORTUNITIES - Posted
July 14, 2010 |
Company:
Energy Labs
Location(s): San Diego, CA
Description: Controls Engineer needed for Custom HVAC equipment.
Build applications with DDC systems design and layout; help
identify profitable business opportunities in regards to HVAC
Controls Provide Controls System Application and Design
Assistance to Design Build Engineers for the purpose of growing
HVAC Controls Business Identify Engineers with potential to grow
HVAC Controls Applications.; create strong relationships with
those Engineers
Qualifications: BS in Mechanical Engineering or a related
technical discipline; 3-5 years of HVAC experience, distribution
experience preferred; Knowledge of HVAC design and application
tools; Exceptional interpersonal and communication skills;
Computer Proficiency
Notes: 9651 Airway Rd. Suite E
San Diego, CA. 92154-7914
Contact (email):
rirani@energylabs.com
Contact (fax): (619) 671-0158
Contact (tel): (619) 671-0100 x 209
Visit Website for more info (URL):
http://www.energylabs.com
|
|
EMPLOYMENT OPPORTUNITIES - Posted
July 01, 2010 |
Company:
Controls Systems Sales
Location(s): Gaithersburg, MD 20879
Description: BAS Sales Engineer
Qualifications: Building Automation Sales Engineer
We are in search of a sales engineer capable of estimating
Building Automation Systems (BAS) and selling to mechanical
contractors with minimal supervision. The ideal candidate will
have experience as a control systems application engineer and
been involved in the sales process in their present or former
jobs. Or, are presently estimating and selling BAS to mechanical
contractors.
Experience:
5+ years experience in HVAC projects and control system design,
must be able to estimate projects utilizing plans and
specifications, and from customer site surveys. This candidate
must be capable of BAS design and consulting and understand the
technical aspects of the industry.
Additional duties this person may be required to perform:
Handle customer issues related to bids, and current and future
projects.
Subcontract negotiations, writing subcontracts Ordering material
Attending customer and project meetings Assist commissioning
team as needed
Compensation:
This position offers car allowance, gas card, benefits.
Compensation will include a base salary and incentive based on
meeting sales goals. Base salary will commensurate with
experience.
Education:
Prefer BS in Mechanical Engineering, Electrical Engineering, or
another technical field related to construction or the controls
industry, however will consider a candidate based on work
experience in our industry.
About our company:
Our company has been in business since 1978 and was recently
purchased by a large HVAC service company in Gaithersburg. We
engineer, install and service BAS systems, and typically compete
against Siemens, Honeywell and Johnson Controls branches. We
represent the following manufacturers: Johnson Controls Facility
Explorer, HI Solutions, and KMC.
Notes:
Contact (email):
dthomas@controlsystemssales.com
Contact (fax): 301-953-0389
Contact (tel): 301-953-1450
Visit Website for more info (URL):
http://www.controlsystemssales.com |
|
EMPLOYMENT OPPORTUNITIES - Posted
June 23, 2010 |
Company: Energy Controls
Location(s): SF Bay Area, California
Description: We are introducing the most exciting new control to
come out in the last 2 decades and need a salesperson.
Qualifications: Someone located within the SF Bay Area.
Someone with some HVAC and possibly Controls experience.
Ability to make contact with building decision makers.
Ability gather and report information on potential buildings.
Notes: We provide:
- Training
- Sales support directly from the president of company and
national sales manager.
- Salary based on experience.
- Please review our website and our "marquee" product (ecWizard)
prior to applying for the position.
Contact (email):
info@energy-controls.com
Contact (fax):
Contact (tel):
Visit Website for more info (URL):
http://www.energy-controls.com |
|
EMPLOYMENT OPPORTUNITIES - Posted
June 7, 2010 |
Company: Belnor Engineering Inc.
Location(s): Vaughan, Ontario, Canada
Description: Belnor Engineering has been involved in the Supply,
wiring and commissioning of Labratory Airflow Control systems
for over 20 years.
We currently seek an APPLICATIONS TECHNICIAN who would be
involved in commissioning, start-up & service on our projects at
major Universities & Pharmaceutical companies in ontario.
Qualifications: Educational Requirements: Certified Engineering
Technologist or equivalent
Experience: At least 2 years in Building Automation or related
field
Notes: Training on our Lab Control Systems will be provided.
Contact (email):
pverma@belnor.com
Contact (fax): 905-264-6432
Contact (tel): 905-264-6372 ext.203
Visit Website for more info (URL):
http://www.belnor.ca |
|
EMPLOYMENT OPPORTUNITIES - Posted
June 2, 2010 |
Company: Teng & Associates
Location(s): Chicago
Description: Teng & Associates, Inc., a rapidly growing, Chicago
based 500+ person Architectural and Engineering firm with
offices nationwide is accepting applications for the following
position in Chicago to support our Technology Solutions group.
We are seeking an experienced Tridium Programmer / Controls
Engineer with a minimum of five years of programming experience
in the building automation industry. The position requires a
strong understanding of building controls and will require the
individual to split time between custom user interface
development, enterprise integrations, and control system design
for building automation.
Qualifications: Qualified candidates shall be proficient
(certification preferred) in the Tridium development AX
platform, as well as common building automation communications
platforms such as Lonworks, BACnet, and Modbus. Other desired
skill sets include a strong understanding of web based platforms
such as dot NET, XML, and SOAP. A strong understanding of SQL,
HTML, JAVA, and C++ is also preferred. Assignments will include
the design and development of custom enterprise based user
interface platforms with integrations to third party software
applications for a number of our nationwide clients. Travel will
be required 30-50%.
Notes:
Contact (email):
SpringerAL@teng.com
Contact (fax):
Contact (tel): 312.616.3036
Visit Website for more info (URL):
http://www.teng.com |
|
EMPLOYMENT OPPORTUNITIES - Posted
April 09, 2010 |
Company: KMC Controls
Location(s): New Paris, Indiana
Description: Technical Trainer
SUMMARY
Conduct technical skills training in the classroom, laboratory,
and job site. Work with the training team to design, develop and
maintain training materials. Will report to the Manager of
Training. Successful candidate must be able to travel up to
25-50% of their time with adequate notice and possess (or be
able to obtain) a valid United States passport.
ESSENTIAL DUTIES AND RESPONSIBILITIES include the following.
Other duties may be assigned.
Deliver technical skills training in the classroom,
laboratory, and job site as needed.
Work with Instructional Designer to design, develop,
implement, and evaluate new and existing technical skills
training.
QUALIFICATIONS
Successful completion of a Bachelors (4-year) college Degree
or more.
Minimum of 3 years experience in HVAC controls related
industry.
Proven ability to program and troubleshoot DDC control
systems.
Experience with KMC digital controls products a major plus.
Previous experience training internal or external customers
preferred.
Knowledge of on-the-job training (OJT) programs a plus.
Superior oral communication and strong written communication
skills required.
Strong organizational skills with a commitment to
student-centered learning.
Able to adapt and learn new procedures and software programs.
COMPUTER SKILLS
Proficient with Microsoft Office Suite
Knowledge of MS Visio or Auto Cad a plus
General IT knowledge preferred
Notes: To submit resume, please go to our websites careers link
at
http://www.kmccontrols.com/company/careers.aspx
Contact (email):
Contact (fax):
Contact (tel):
Visit Website for more info (URL):
http://www.kmccontrols.com |
|
EMPLOYMENT OPPORTUNITIES - Posted
April 03, 2010 |
Company: O&M Engineering
Location(s): Ellicott City MD
Description: Automation Applications Engineering - Bachelor's
degree in related field with 5 years exp in designings,
programming, initiating start-up and troubleshooting new and
existing enterprise facility systems.
Qualifications: Strong organization and flexibility to change
work priorities a must. Exp. in IT MS operating systems; MS
SQL Server, MySQL, Oracle or other; Modicon, Allen-Bradley or
similar PLC; JCI, Tridium, Honeywell or similar BAS; GUI design,
programming of Iconics, Wonderware or similar HMI; VBA, VBScript
and Jscript. BS degree in related field required with
2-5 years work exp in Control System design, SCADA, PLC,
configuration. Strong Project Management experience required
(i.e. allocate project resources effectively, analyze
performance against project plan, ensure system end to end
delivery). Travel required; some overnight/weekends (<10%).
Notes: Company policy does not offer sponsorships nor relocation
package.
Contact (email):
amosten@omengineering.com
Contact (fax):
Contact (tel):
Visit Website for more info (URL):
http://omengineering.com |
|
EMPLOYMENT OPPORTUNITIES - Posted
March 19, 2010 |
Company: Blue Ridge Technologies
Location(s): Atlanta, GA or other major city
Description: National Account Manager
Qualifications: BA/BS in Business, Engineering or Technical
Field; A solid understanding of network communications
technology; Regular travel throughout the US is required,
approximately 50% to 75%
Notes:
Contact (email): HR@brtint.com
Contact (fax): 770-790-4883
Contact (tel): 770-790-4880
Visit Website for more info (URL):
http://www.brtint.com/ABOUT_C.html |
|
EMPLOYMENT OPPORTUNITIES - Posted
February 22, 2010 |
Company: Proxime Management Services
Location(s): London, UK Jeddah KSA
Description: Seeking Experienced Tridium Niagara Controls
Engineer to assist in Management of a World Class LEED Platinum
Project in Saudi Arabia.
Qualifications: Master Degree in Automated Controls; 5 years
experience with Tridium Niagara; Large Scale Infrastructure
Projects Engineering Management.
Notes: Most be willing to work in KSA for 4 months single status
for 2 weeks off. Position may become permanent with family
status.
Contact (email):
sherman.havens@proximems.com
Contact (fax):
Contact (tel): +966 596 20 1088
Visit Website for more info (URL):
http://www.proximems.com |
|