I am publishing this as a draft on purpose. Five questions and short answers are fine.
- Does the sequence match what you have seen on these units in the field? If not, where does it diverge?
- Was Path A tempting, or was the correct answer obvious from the start? If it was obvious, the simulator is confirming what you already knew instead of teaching anything.
- Did anything read as fake? A number, a diagnostic step, a piece of dialogue.
- Did it run clean on your machine? Browser and operating system help.
- What case should be next? This format works on anything with a chain behind it. Priority array overrides. A network valve that reads commanded and will not move. An airflow station reporting a number the equipment cannot produce.
That last one is the real ask. I have a stack of logs. I would rather build the failures you are actually chasing than the ones I happen to have.
Comment, message me, or mark up the file and send it back. Corrections are more useful to me than compliments.
Educational and informational use only. This is not an official training resource, and it does not replace certified training. Verify every procedure against manufacturer documentation and the nameplate for the unit in front of you.
Built with AI assistance. The field case, the failure chain, and the corrections are mine. The code is the part I delegated.
The link is here to gain access and download the files: HumidiClean Series HC-4000 Humidifier
Armstrong HC-4500 Maintenance Simulator Feedback Survey
Please rate your experience with the Armstrong HC-4500 Maintenance Simulator. Your feedback helps us improve training quality.
